Nickel Plated Copper Foil for Electrical Appliances

• Material: Cusn Foil
• Shape: Foil
• Alloy: Alloy
• Color: Golden
• Standard: GB/T
• Thickness Range: 0.01mm~0.15m
• Model NO.: C 1100
• Widthness: 4mm~650mm
• Density: 8.83G/Cm3
• Chemical Composition: Cu Sn
• Thermal Conductivity(20ºC): 120W/(M/ºC)
• Thickness Tolerance: ±0.003
• Transport Package: Base on Customers Requirement
• Specification: Customzied
• Trademark: Allotech
• Origin: China
• HS Code: 7410121000
• Production Capacity: 50 Tons Every Month

Product Description

Product Introduction

Nickel metal has high stability in air, strong passivation ability, can form a very thin passivation film in air, can resist the corrosion of alkali and acids, so that the product is chemically stable in work and alkaline environment, not easy to discolor, can only be oxidized above 600 ºC; nickel plating layer has strong adhesion, not easy to fall off; nickel plating layer can make the surface of material harder, can improve the product wear resistance and acid and alkali corrosion resistance, the product wear resistance, corrosion, rust prevention performance is excellent. Due to the high surface hardness of nickel plated products, nickel plated crystals are extremely fine, with high polishability, polishing can reach the mirror appearance, in the atmosphere can be maintained in the long term clean, so it is also commonly used for decoration. The nickel plated copper foil produced by ALLOTECH has a very good surface finish and a flat shape. They are also degreased and can be easily laminated with other materials. At the same time, we can also customize our nickel-plated copper foil by annealing and slitting according to customer requirements.

Base Material

High-precision Rolled Copper Foil (JIS:C1100/ASTM:C11000) Cu content more than 99.96%

Base Material Thickness Range

0.012mm~0.15mm (0.00047inches~0.0059inches)

Base Material Width Range

≤600mm (≤23.62inches)

Base Material Temper

According to customer requirements

Application

Electrical appliances, electronics, batteries, communications, hardware and other industries;

Performance Parameters

Items	Wieldable Nickel Plating	Non-weld Nickel Plating
Width Range	≤600mm (≤23.62inches)
Thickness Range	0.012~0.15mm (0.00047inches~0.0059inches)
Nickel Layer Thickness	≥0.4µm	≥0.2µm
Nickel Content of Nickel Layer	80~90% (Can adjust nickel content according to customer welding process)	100% Pure Nickel
Surface Resistance of Nickel Layer (Ω)	≤0.1	0.05~0.07
Adhesion	5B
Tensile Strength	Base Material Performance Attenuation after Plating ≤10%
Elongation	Base Material Performance Attenuation after Plating ≤6%