| Customization: | Available |
|---|---|
| Product Type: | Wire |
| Material: | Pure Ti |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Titanium Grade 1 Wire is a revolutionary new vaping product, Titanium gave us all the characteristics we desired in a Vaping Wire. It produces a lower ohm per wrap than resistance A1 wire and Nichrome, thus increasing the heating suirace area of the coil, and produces more vapor. We also found that TItanium does not give off any taste. So the flavor of the e-juice tastes more pure and clean than when used with Resistance A1 and Nichrome. Titanium (Gr1) is highly purify Titanium wire, there will no dangerous oxide, and easiest to bend and be formed wihout losing toughness.
Resistance heating wire for ecig
| Type | Wire gauge | Length in Spools |
| A1 wire | 20/22/24/26/28/30/32/34/36 Gauge | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
| Nickel wire | 20/22/24/26/28/30/32/34//36 Gauge | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
| Nichrome 80 wire | 20/22/24/26/28/30/32/34/36 Gauge | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
| Titanium wire | 20/22/24/26/28/30/32/34/36 Gauge | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
| Stainless steel 304, 316 wire | 20/22/24/26/28/30/32/34/36 Gauge | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
| Flat wire | 5m;10m;50m,100m,50g,100g,500g,1kg,3kg |
Titanium Wire Specifications
|
Length |
30Feet, 100Feet, 1kg, 3kg |
Material |
Titanium |
|
Diameter |
0.51mm,0.4mm,0.32mm,0.25mm |
Function |
Resistance Wire for Vaping |
|
Gauges |
24ga, 26ga, 28ga, 30ga |
Advantage |
Clean, healthy, Safety |
Titanium wire features
Ti wire is a temperature regulated resistance wire. This allows for UN-Paralleled consistency and safety. Our positive temperature coefficient is suitable for both mechanical devices, as well as regulated devices. our Titanium will work with VV, VW and " Temperature Protected" devices. Since the calibration scale for Ni200 is very loose to begin with ( not all Ni wire has the same tempco) the calibratuion discrepancy between "Ni 200" and our specific Titanium wire should be approachable.
Our Titanium is NOT off the shelf "industrial" grade wire. We have invested over one year of research and development, to solve the problems associated with "off the shelf" Titanium resistance wire. You will not find any other product like Sweet Spot Vapors Ti wire on the market. It is specifically designed, from the ground up, for vaping and represents a first and only category, for "vape specific" Titanium.
Chemicals Component
|
C |
Max 0.1% |
|
Fe |
Max 0.2% |
|
H |
Max 0.015% |
|
N |
Max 0.03% |
|
O |
Max 0.18% |
|
Ti |
Min 99.5% |
Titanium wire advantages
Ti wire raises in resistance once it's optimum temperature is reached. This keeps your vapor cool and consistent, from the beginning of your hit to the end. Since the wire starts at a lower resistance, it comes up to temperature very quickly, until it's optimum is reached. Then the resistance climbs according to the amount of power that is put into the wire. This reduces the strain on your battery, while offering complete control of the heat inside of your atomizer.
Ti wire is made from a custom metallurgical process, that was developed with our foundry and drawing facility. Ti wire contains NO chromium or nickel. The wire is made from certified medical grade titanium and undergoes a proprietary vacuum annealing process. This removes unwanted oxygen impurities (during drawing) and allows for the most consistent heating possible.Ti wire will NOT form any harmful chromium, nickel or iron oxides, and therefore the flavor of your liquid remains completely
pure. Additionally ALL of our wire is cleaned in an ultrasonic/steam bath, using food safe degreaser, followed by a rinse in distilled water.
Ti wire also acts as a fuse. When the MAX temperature is exceeded Ti wire will "fail". This is by design, and will keep your battery safe.
WARNING : DO NOT DRY BURN Ti wire.the wire is designed to fail above it's max temperature....dry burning is NOT necessary to form tight coils. You can apply low heat to crimp your coils (micro) through "pulsing" your mod, or using a low temperature torch. However we generally recommend "spaced" coils to allow for maximum flavor and heat dispersion. To clean your coils, it is not necessary to dry burn (wire will turn white when it has failed)...simply brush the coils off under warm water, and they will be asgood as new.
){kind=link}