| Type: | Copper Wire |
|---|---|
| Application: | Welding |
| Material: | Cu Base Alloy Wire |
| Shape: | Round |
| Alloy: | Alloy |
| Color: | Yellow |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
ERCuSi-A filler metals are copper-base alloys containing approximately 3% silicon; they may also contain small percentages of manganese, tin, or zinc. The are used for gas tungsten and gas metal arc welding of copper-silicon and copper-zinc base metal, to themselves and also to steel.
When gas metal arc welding with ERCUSi-A filler metals, it generally is best to keep the weld pool small and the interpass temperature below 150°F (65°C) to minimize hot cracking. The use of narrow weld passes reduces contraction stresses and also permits faster cooling through the hot-short temperature range.
When gas tungsten arc welding with ERCuSi-A filler metals, best results are obtained by keeping the weld pool small. Preheating is not required. Welding can be done in all positions, but the flat position is preferred.
| Product Name | AWS | Chemical Composition | Characteristics & Application |
|---|---|---|---|
| S201 | ERCu | Sn1 Si0.3Mn0.3 Cu Rem. | Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. |
| S211 | ERCuSi-A | Si3 Mn1 Cu Rem | Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel |
| S212 | ERCuSn-A | Sn5 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S213 | ERCuSn-C | Sn8 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S214 | ERCuAl-A1 | Al7.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S215 | ERCuAl-A2 | Al9 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S221 | Cu60 Sn1 Si0.3 Zn Rem. | Melting point is about 890ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | |
| S221F | Cu60 Sn1 Si 0.3 Zn Rem. | S221 welding rod coated with flux. | |
| S222 | RBCuZn-C | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting point is about 880ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. |
| S222F | RBCuZn-C | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222 welding rod coated with flux. |
| S223 | RBCuZn-A | Cu59 Sn0.6 Zn Rem. | Melting point is about 900ºC. Braze welding of copper, steel and cast iron. |
| S224 | Cu62 Si0.5 Zn Rem. | Melting point is about 905ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | |
| S225 | RBCuZn-D | Cu48 Ni10 Zn Rem. | Melting point is about 935ºC and high strength. Braze welding of steel, nickel and carbide alloys. |
| S226 | Cu60 Sn0.3 Si0.2 Zn Rem. | Melting point is about 900ºC. Gas welding of brass, also braze welding of copper, steel and cast iron. | |
| S227 | RBCuZn-B | Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem. | Melting point is about 880ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. |
| S229 | Cu55 Ni6 Mn4 ZnRem | Melting point is about 920ºC, high strength. Braze welding of steel, nickel and hard carbide. | |
| S231 | ERCuNi | Ni30,Fe0.6,Mn1, Ti0.3,CuRem | Good corrosion resistance for sea water. Suitable for joining and overlay welding of Copper Nickel alloy. |
| S232 | Ni10,Fe1,Mn1, Ti0.2,CuRem | Good corrosion resistance for sea water. Suitable for joining and overlay welding of Copper Nickel alloy. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}