| Customization: | Available |
|---|---|
| Product Type: | Wire |
| Material: | Ni, Fe, Cr, Mo, Si, Mn, B |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Description
Amorphous Alloy is a cored wire specifically designed for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1600 degrees F. High chrome like finishes can be obtained by typical grinding and lapping techniques. It has found use in a wide variety of high wear applications, anti-skid surfacing applications, and corrosive environments. The addition of 9% nickel gives it greater corrosion resistance than 95MXC for most environments. It can equivalent to Tafa 90MXC.
Applications
Boiler Tubes & Tube Shields
Rolls
Anti-Skid
Product Details
Chemical composition
| Grade | Chemical composition(%) | ||||||
| Amorphous Alloy | Cr | Mo | B | Ni | Si | Mn | Fe |
| 23 | / | 2 | / | 1 | / | Balance | |
Typical Deposit Characteristics
| Typical Hardness | Bond Strength | Deposit Rate | Deposit Efficiency | Corrosion Resistance |
| HRC 45-50 | 10000 psi | 10 lbs/hr/100A | 80% | Excellent |
Sizes & Packaging
| Diameter | Packaging | Wire Weight |
| 1/16" (1.6mm) | MIG (D 300) | 15kg((33 lb)/spool |
Note that special sizes or packing requirements are available on all requests.
){kind=link}