| Customization: | Available |
|---|---|
| Type: | Copper Wire |
| Application: | Welding |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
RBCuZn-B (low-fuming brass-nickel) braze welding rods are similar to RBCuZn-A rods but contain additions of iron and manganese which serve to increase the hardness and strength. In addition, a small amount of silicon [0.04% to 0.20%] serves to control the vaporization of the zinc, yielding the "low-fuming" property. The nickel addition [0.2% to 0.8%] assures uniform distribution of the iron in the deposit.
The filler metal is used for brazing and braze welding of steel, cast iron, copper, copper alloys, nickel, nickel alloys, and stainless steel. RBCuZn-B filler metal also is used for the surfacing of steel. It is used in torch, induction, and furnace processes. Flux and joint clearances from 0.002 in to 0.005 in [0.05 mm to 0.13 mm] are suitable.
| Product Name | AWS | Chemical Composition | Characteristics & Application |
|---|---|---|---|
| S201 | ERCu | Sn1 Si0.3Mn0.3 Cu Rem. | Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. |
| S211 | ERCuSi-A | Si3 Mn1 Cu Rem | Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel |
| S212 | ERCuSn-A | Sn5 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S213 | ERCuSn-C | Sn8 Cu Rem. | Wear resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S214 | ERCuAl-A1 | Al7.5 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S215 | ERCuAl-A2 | Al9 Cu Rem. | Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. |
| S221 | Cu60 Sn1 Si0.3 Zn Rem. | Melting point is about 890ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | |
| S221F | Cu60 Sn1 Si 0.3 Zn Rem. | S221 welding rod coated with flux. | |
| S222 | RBCuZn-C | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | Melting point is about 880ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. |
| S222F | RBCuZn-C | Cu58Sn0.9Si0.1 Fe0.8 Zn Rem. | S222 welding rod coated with flux. |
| S223 | RBCuZn-A | Cu59 Sn0.6 Zn Rem. | Melting point is about 900ºC. Braze welding of copper, steel and cast iron. |
| S224 | Cu62 Si0.5 Zn Rem. | Melting point is about 905ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. | |
| S225 | RBCuZn-D | Cu48 Ni10 Zn Rem. | Melting point is about 935ºC and high strength. Braze welding of steel, nickel and carbide alloys. |
| S226 | Cu60 Sn0.3 Si0.2 Zn Rem. | Melting point is about 900ºC. Gas welding of brass, also braze welding of copper, steel and cast iron. | |
| S227 | RBCuZn-B | Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem. | Melting point is about 880ºC. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. |
| S229 | Cu55 Ni6 Mn4 ZnRem | Melting point is about 920ºC, high strength. Braze welding of steel, nickel and hard carbide. | |
| S231 | ERCuNi | Ni30,Fe0.6,Mn1, Ti0.3,CuRem | Good corrosion resistance for sea water. Suitable for joining and overlay welding of Copper Nickel alloy. |
| S232 | Ni10,Fe1,Mn1, Ti0.2,CuRem | Good corrosion resistance for sea water. Suitable for joining and overlay welding of Copper Nickel alloy. |
){kind=link}